MIRAGE 3 DIG EVO FM-AEV AUDIO PROCESSOR
MIRAGE DIG EVO the new Digital Audio Processor AEV
The Mirage Dig Evolution is a fully digital audio processor, based on DSPMirage Dig Evo technology is a complete audio signal processing processor for AM, FM and TV broadcasts.
Digital audio inputs/outputs l AES/EBU and Optics
Balanced analog audio inputs/outputs
AES/EBU standard, 24 bit resolution low structural latency of the signal ( 3 ms )
Four-band audio processing and compression
Input switching with selectable backup function, and more.
Women's clothing size
Size | XS | S | M | L |
---|---|---|---|---|
Euro | 32/34 | 36 | 38 | 40 |
USA | 0/2 | 4 | 6 | 8 |
Bust(in) | 31-32 | 33 | 34 | 36 |
Bust(cm) | 80.5-82.5 | 84.5 | 87 | 92 |
Waist(in) | 24-25 | 26 | 27 | 29 |
Waist(cm) | 62.5-64.5 | 66.5 | 69 | 74 |
Hips(in) | 34-35 | 36 | 37 | 39 |
Hips(cm) | 87.5-89.5 | 91.5 | 94 | 99 |
With your arms relaxed at your sides, measure around the fullest part of your chest.
Measure around the narrowest part of your natural waist, generally around the belly button. To ensure a comfortable fit, keep one finger between the measuring tape and your body.
Mirage 3 Dig Evo FM-AEV
GENERAL SERVICES
Frequency Response
20Hz ÷ 15 KHz FM version
20Hz ÷ 20 KHz HD version
20Hz ÷ 10 KHz AM version
Stop band rejection > 78 dB over 17 KHz
Noise > 65 dB in all conditions (depends on processing)
Total distortion < 0.01 %.
Total system separation > 67 dB (30 Hz - 15 kHz)
ANALOG AUDIO INPUT
Left and Right configuration
Impedance 10 K ohm / 600 ohm balanced
CMRR > 45 dB from 30 to 15 Khz
A/D conversion Sampling frequency 192 kHz
Sensitivity ±12dBu
Maximum input level +15 dBu
XLR type connector, female,
Pin 1 Chassis Pin 2 and 3 electronically balanced, floating and symmetrical
DIGITAL INPUT
AES 3 professional digital input configuration (IEC-60958)
Digital AES 3 Input Impedance 110 ohm balanced
XLR female AES 3 digital input connector
Sampling frequency Automatic lock 32 - 44.1 - 48 - 96 KHz
Resolution 24 Bit
ANALOG AUDIO OUTPUT
Left and Right configuration. Flat or pre-format (50μS - 75μS)
Electronically balanced and floating 30 ohm impedance
Minimum load impedance 600 ohms
Maximum output level +15 dBu in 600 ohm load
XLR type connector, male
Pin 1 Frame
Electronically balanced, floating and symmetrical pins 2 and 3
DIGITAL OUTPUT
Digital output sampling rate software selectable 32 - 44.1 - 48 - 96 KHz
Resolution 24 Bit
AES 3 Transformer Balanced stereo digital output configuration (IEC-60958)
Balanced digital output impedance 110 ohms
Digital output level - 12.00 / 0 dBFS adjustable
XLR male digital output connector
STEREO GENERATOR (MPX version only)
Configuration an output
Pilot Freq. 19 KHz ± 0.001% Max on temp.
Pilot injection +4 ÷ 12
Distortion < 0.005 % @1 kHz
Acoustic signal ratio 70 dB (Din Audio, Bypass mode) Typical
Stereo separation 60 dB Typical
Main to Large Sub crosstalk 48 dB 30-15 kHz
Large Sub to Main Crosstalk 46 dB 30-15 kHz
Subcarrier suppression 38 kHz 70 dB Typical
Suppression 76 kHz 70 dB Typical
Composite audio level 0 ÷ 12dB
BNC connector
Output impedance 50 ohms
DATA
Ethernet / RS232- terminal interface on the back, asynchronous
Full duplex data input
Selectable format
Serial transmission speed 2400 ÷ 19600 baud
RJ45 / RS232/ USB connector
Microprocessor controlled data management
Non-volatile memory Flash data retention 10 years
Logical I/O
DB15 female cannon connector
GENERAL
Mains voltage 90 - 260 Vac / 50 Hz full range
Dimensions (WxHxD) 48.3 x 19.4 x 4.4 cm 1 rack unit
Weight 3.5 Kg.
Working temperature 0 ÷ 50° C.
Working humidity. Max 95% non-condensing